10
1. Einrichtungsassistenten starten
Turn on the Raumfeld Controller by briefly
pressing the On/Off button.
After a few seconds the Raumfeld setup
screen will be displayed and the setup
wizard will activate.
≥ In an unconfigured Raumfeld system
the setup wizard will automatically be
started as soon as the Controller is turned
on. In order to access the setup wizard at
a later stage choose “Settings > Reset >
Controller Configuration”.
2. Following the setup wizard
In the setup wizard, please follow the
path „Set up system now“ in order to set
up your Raumfeld system.
Setup: New Raumfeld System
KURZ DRÜCKEN
To Next Page
Loading...