1
Tevion 1923DT TV/DVD Quick Start Guide
Insert the batteries
Insert two AAA size batteries in the remote control, ensuring
that the polarity is correct, as shown.
Connect the set
Connect the aerial plug to the RF socket on
the back of the set.
Connect the mains adaptor cable to the
DC-12V socket on the back of the set,
then connect the mains cable between the
adaptor and the mains supply. The indicator
on the front of the set will show red.
To switch on, press the
POWER button on
the top of the set, or aim the remote control
at the indicator on the front of the set, and
press the red
POWER button. The indicator
on the front of the set will show blue.
Tune the TV
The first time you switch on the set, you should see the
Installation Guide screen:
Use the
and buttons on the remote control to select the
correct Language.
Press the
button to highlight Auto Tuning, then press the
OK button.
If you do not see the Installation Guide screen:
Press the
MENU button on the remote control. The CHANNEL
menu is displayed.
Press the
button to highlight Auto Tuning, then press the
OK button.
When you see the Auto Tuning box:
Use the
and buttons to select the correct Country. (Users
in Eire should select ‘UK’, which uses the same TV bands.)
Press the
button to highlight Start, then press the OK
button. The TV will automatically search for any digital and
analog TV and radio stations that are available in your area.
This may take several minutes.
If the stations are not in the order you would prefer, or if there are stations you do not want
to watch, then see
Using the Channel menu in the User Guide, to find out how to edit the
programme list.
•
•
•
•
•
•
•
•
•
•
RF
DC-12V
To Next Page
Need help?
Display
Power
Audio
Connectivity
