Texas Instruments TI-99/4A - Page 196

STEP 9
The new command will be the following:
*PRESS CASSETTE PLAY CS1
THEN PRESS ENTER
Push the PLAY button on your cassette recorder.
Then press the ENTER key on your computer
console.
10
Relax one more time. The screen message
will say
♦CHECKING
This message may stay on the screen for as long
as five minutes.
When the message changes to
*DATAOK
it's finished checking.
STEP 11
The message
*PRESS CASSETTE STOP CS1
THEN PRESS ENTER
appears on the screen. So push the STOP button
on your cassette recorder and then the ENTER
key on the computer console.
195