Texas Instruments TI-99/4A - Page 198

If one of the other error messages appeared, you
have three choices:
• Press the C key to CHECK the recording
again. (Before you do this, however, adjust the
recorder volume and tone controls to the
correct levels.)
or
• Press the R key to record the program again.
(Then follow the eleven steps for saving a pro
gram onto a cassette tape.)
or
• Press the E key to exit the recording process.
(Then follow the instructions which appear on
your screen.)
With some cartridge software, you can SAVE
(onto the cassette) data which you have gener
ated using the cartridge. ToSAVE material from
a cartridge onto a cassette tape, follow steps 1-11
exactlyas if you were saving material original
ly loaded from a cassette.
197