Move From Register to Register MV
3-179 Instruction SetSPRU733
Opcode .D unit
31 292827 2322 1817 1312 76543210
creg z dst src2 0 0 0 0 0 0 1 0 0 1 0 1 0 0 0 0 s p
3 1 5 5 1 1
Opcode map field used... For operand type... Unit
src2
dst
sint
sint
.D1, .D2
Description The MV pseudo-operation moves a value from one register to another. The
assembler uses the operation ADD (.unit) 0, src2, dst to perform this task.
Execution if (cond) 0 + src2 → dst
else nop
Instruction Type Single-cycle
Delay Slots 0
To Next Page
Loading...
