Texecom Premier Elite ComGSM - SMS Command Reference; Premier 24 SMS Commands; Premier 48;88;168;640 SMS Commands

Premier Elite Com GSM Module Installation Manual
INS315-4 9
Premier 24 SMS Control Commands
Operation Command Example
Arm System ???? arm [s] “5678 arm s” = arm the system and report back status.
Part Arm System ???? parm (1/2/3) [s] “5678 parm 1” = part arm 1 the system (no status)
Disarm System ???? darm [s] “5678 darm” = disarm the system (no status).
Reset System
???? reset
“5678 reset” = reset the system
Turn Outputs On
???? op on (outputs) [s]
“5678 op on 2” = turn PC output 2 on.
Turn Outputs Off ???? op off (outputs) [s] “5678 op off 1 s” = turn PC output 1 off and report back status.
Pulse Outputs On ???? op on (outputs) [p] “5678 op on p” = pulse PC output 2 on.
Pulse Outputs Off ???? op off (outputs) [p] “5678 op off p” = pulse PC output 2 off.
Send Message ???? mess (message) “5678 mess How Are You” = Displays How Are You on all keypads.
System Status ???? status
“5678 status” =
System (Disarmed or Armed)
PC Output 1 ON
PC Output 2 ON
Premier 48/88/168/640 & Premier Elite 24/48/88/168/640 SMS Control Commands
Operation Command Example
Arm System ???? arm [areas][s] “5678 arm s” = arm all areas and report back status.
Part Arm System ???? parm (1/2/3)[s] “5678 parm 1” = part arm 1 all areas (no status)
Disarm System ???? darm [areas][s] “5678 darm abcs” = disarm areas abc and report back status.
Reset System ???? reset [areas] “5678 reset” = reset all areas
Omit Zone(s) ???? omit (zones) “5678 omit 1 5 12” = omit zones 1, 5 and 12
Unomit Zone(s) ???? uomit (zones) “5678 uomit 12” = reinstate zone 12
Turn Outputs On
???? op on (outputs)[s]
“5678 op on 134” = turn PC outputs 1, 3 and 4 on.
Turn Outputs Off
???? op off (outputs)[s]
“5678 op off 4s” = turn PC output 4 off and report back status.
Pulse Outputs On ???? op on (outputs) [p] “5678 op on p” = pulse PC output 2 on.
Pulse Outputs Off ???? op off (outputs) [p] “5678 op off p” = pulse PC output 2 off.
Send Message ???? mess (message) “5678 mess How Are You” = Displays How Are You on all keypads.
System Status ???? status
“5678 status” =
Armed: (1 - 8 or A - P)
Alarm: (1 - 8 or A - P)
Output: (1 - 8)
Mains: (OK or Fault)
Battery: (OK or Fault)
Phone Line: (OK or Fault)
Output Status ???? status O
“5678 status O” =
Armed: (1 - 8 or A - P)
Alarm: (A - P)
Channels: (1 - 8)
Digi: (1 - 8)
Panel: (1 - 5)
Mains: (OK or Fault)
Battery: (OK or Fault)
Phone Line: (OK or Fault)
GSM/Radio-Pad Status ???? status R
“5678 status R” =
Serial: ####### (only if Radio-Pad fitted)
NUA: ###### (only if Radio-Pad fitted)
FSS: ### (only if Radio-Pad fitted)
RSS: ### (only if Radio-Pad fitted)
BER: ### (only if Radio-Pad fitted)
CRC: ### (only if Radio-Pad fitted)
GSM-Signal: ###
GSM-BER: ###