CESSNA SECTION 8
MODEL 208B 867 SHP AIRPLANE HANDLING, SERVICE
GARMIN G1000 AND MAINTENANCE
U.S.
CLEANING AND CARE (Continued)
INTERIOR CARE
The instrument panel, control wheel, and control knobs need only be
wiped off with a damp cloth. Oil and grease on the control wheel and
control knobs can be removed with a cloth moistened with Stoddard
solvent. Volatile solvents must never be used since they soften and
craze the plastic.
Do not use any of the following solvents for cleaning of
the interior or interior components: methanol,
denatured alcohol, gasoline, benzene, xylene, MEK,
acetone, carbon tetrachloride, lacquer thinners,
commercial or household window cleaning sprays.
When in doubt about any product, do not use it.
The plastic trim, headliner, door panels, and floor covering in the crew
area of both versions and the rear cabin headliner and sidewalls of the
Passenger Version need only be wiped off with a damp cloth. In Cargo
Versions, the sidewalls, cargo doors, and overhead in the cargo area
are not easily soiled or stained. Dust and loose dirt must be picked up
with a vacuum cleaner. Stubborn dirt can be wiped off with a cloth
moistened in clean water. Mild soap suds, used sparingly, will remove
grease. The soap must be removed with a clean damp cloth.
To remove dust and loose dirt from the upholstery and carpet, clean the
interior regularly with a vacuum cleaner.
Blot up any spilled liquid promptly with cleansing tissue or rags. Don't
pat the spot; press the blotting material firmly and hold it for several
seconds. Continue blotting until no more liquid is taken up. Scrape off
sticky materials with a dull knife, then spot clean the area.
(Continued Next Page)
208BPHCUS-00 8-55
To Next Page
Loading...
