SECTION 8 CESSNA
AIRPLANE HANDLING, SERVICE MODEL 208B 867 SHP
AND MAINTENANCE GARMIN G1000
U.S.
CLEANING AND CARE (Continued)
INTERIOR CARE (Continued)
Oily spots may be cleaned with household spot removers, used
sparingly. Before using any solvent, read the instructions on the
container and test it on an obscure place on the fabric to be cleaned.
Never saturate the fabric with a volatile solvent; it may damage the
padding and backing materials.
Soiled upholstery and carpet may be cleaned with foam type detergent,
used according to the manufacturer's instructions. To minimize wetting
the fabric, keep the foam as dry as possible and remove it with a
vacuum cleaner.
The protective plywood floor panels (if installed) and aft bulkhead
covering in the cargo area must be vacuum cleaned to remove dust
and dirt. A cloth moistened with water will aid in removing heavy soil.
Do not use excessive amounts of water, which would deteriorate the
protective floor panels.
For complete information related to interior cleaning, refer to the 208
Maintenance Manual, Chapter 12-23-01, Interior - Cleaning/Painting.
AVIONICS CARE
The Garmin GDU displays have an anti-reflective coating that is very
sensitive to skin oils, waxes, ammonia, and abrasive cleaners. Clean
the displays as described in the Garmin G1000 Cockpit Reference
Guide.
208BPHCUS-00
8-56
To Next Page
Loading...
