CM-600
5
Important Safety Information
Electric shock hazard:
Do not operate with the case or battery cover open.•
Before removing the case or battery cover, remove the test leads (or jaw) from the circuit and shut •
off the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
Unless measuring voltage or current, shut off and lock out power. Make sure that all capacitors are •
discharged. Voltage must not be present.
Using this unit near equipment that generates electromagnetic interference can result in unstable •
or inaccurate readings.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
Do not change the measurement function while the test leads are connected to a component or
circuit.
Failure to observe this precaution may result in injury and can damage the unit.
Electric shock hazard:
Do not attempt to repair this unit. It contains no user-serviceable parts.•
Do not expose the unit to extremes in temperature or high humidity. •
Refer to “Specifications.”
Failure to observe these precautions may result in injury and can damage the unit.
To Next Page
Loading...
