4
Important Safety Information
Electric shock hazard:
Do not expose this unit to rain or moisture.•
Use this unit for the manufacturer’s intended purpose only, as described in •
this manual. Any other use can impair the protection provided by the unit.
Use test leads or accessories that are appropriate for the application. Refer to •
the category and voltage rating of the test lead or accessory.
Inspect the test leads or accessory before use. They must be clean and dry, •
and the insulation must be in good condition.
Before opening the case, remove the test leads from the circuit and shut off •
the unit.
Failure to observe these warnings could result in severe injury or death.
Electric shock hazard:
Do not attempt to repair this unit. It contains no user-serviceable parts.•
Do not expose the unit to extreme temperatures or high humidity. Refer to •
“Specications”.
Failure to observe these precautions may result in injury and can damage the
instrument.
To Next Page
Loading...
Need help?
General