Textron Jacobsen AR-5 - Page 166

5-38 4181383 First Edition
HYDROSTATIC POWER TRAIN
5
Retainer Screw Torque Sequence
See Figure 5-37.
Figure 5-37
1. Install retainer screws (1—8) finger tight in sequence
as shown above.
2. Tighten retainer screws (1—8) to 50 lb-in. (6 N•m) in
sequence as shown above.
3. Tighten retainer screws (1—8) to 300 lb-in. (34 N•m)
in sequence as shown above.
Valve Housing Screw Torque Sequence
See Figure 5-38.
Figure 5-38
1. Install valve housing screws (1—4) finger tight in
sequence as shown.
2. Tighten valve housing screws (1—4) to 750 lb-in. (85
N•m) in sequence as shown.
TN1529
2
3
5
7
8
6
4
1
TN1530
4
1
2
3