Textron Jacobsen HR-5111 - Page 337

STEERING
4203780 First Edition 7-11
7
Steering Valve Service Fixture
See Figures 7-18 and 7-19.
Figure 7-18
NOTICE
Figure 7-19
1. Place the steering valve service fixture (2) securely in
a vise.
2. Place the steering valve (1) into the service fixture
(2), input shaft down.
3. Secure the steering valve to the service fixture using
four nuts (3).
IMPORTANT
Scribe a line from the top to the bottom of the
steering valve assembly, not including the steering
tube. Use the scribed line for reference when
assembling the valve sections.
Required Tools or Equipment
Steering Valve Service Fixture
Do not clamp the steering valve assembly directly
into a vise. Clamping the steering valve directly
into a vise may damage or distort the steering
valve.
TN1435
TN1437
3
1
2