28 SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
The way you operate the engine is a major factor in determining engine performance and useful life.
This affects the way you operate in the
– first 5 hours of operation.
– first 5 hours of operation after extensive repairs, where the engine was completely disassembled.
– first minutes until the engine is warm.
Observe the following guidance to achieve optimal break-in:
Avoid – engine speeds over 6000 min
-1
[rpm].
– long periods of idle operation.
– long periods of operation at low engine speeds.
– long periods of operation at the same engine speed.
– long periods of operation at full load.
Perform – vary engine speed.
– momentary bursts of acceleration, when the engine is warm.
4.2 Operation during the break-in period
4 Operation
4.2 Operation during the break-in period
To Next Page
Loading...
