61SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
13
12
11
14
15
► Check the valve lash
13
of all valves on the
cylinder using a feeler gauge.
Required valve lash:
0,2 – 0,3 mm
► If the valve lash of one or more valves is not
right, continue with chapter 8.5.2 Adjusting
valve lash.
Checking valve lash on the 1st cylinder
► Turn the camshaft until the position of the
camshaft is as illustrated. (See the vehicle
manufacturer‘s documentation.)
The camshaft is marked at the 2nd cylinder end
only.
The inscription
11
is not visible.
All rocker arms
12
on the cylinder have a
certain amount of play.
► Replace the valve cover seals
14
.
8 Service tasks in the workshop
8.5 Checking and adjusting valve lash
► Clean the sealing surface
15
with sealing
surface cleaner.
To Next Page
Loading...
