86 SHB MPE850 Rev F | 408014 | 408090 | 408101 | 408246 |
5
4
► Insert the hose.
► Close the hose clamp
5
.
Tightening torque:
5 Nm +0,5 Nm [3.7 lbf ft +0.4 lbf ft]
Flushing coolant circuit
► Fill the expansion tank
4
with clean fresh
water.
Water drains off through the heat exchanger.
► Repeat the procedure until only clear water
drains off through the heat exchanger.
8 Service tasks in the workshop
8.11 Changing coolant
To Next Page
Loading...
