Textron MPE 850 OFF-ROAD - Workshop Equipment and Tools

12 TD410023-B RLF
BEFORE YOU BEGIN WORKING
WORKSHOP EQUIPMENT AND TOOLS
In addition to the TEXTRON MOTORS special tools, you will require the following workshop equipment and
tools when working on the engine. The figures are examples of suitable workshop equipment and tools.
Figure Description
Workshop crane with
carrying strap
Minimum lifting capacy
300 kg [650 lb]
Engine stand
Minimum lifting capacy
300 kg [650 lb]
Mounting bolts M6 and
M10
Drain tray
Funnel
Syringe applicator
Minimum 40 ml
Bar magnet
Universal strap wrench
Rubber mallet
Figure Description
Torque wrench
3 – 70 Nm
[2 – 52 lbf ft]
with extension and
insert adapter
Reversible ratchet
with extension and
insert adapter
Torx® screwdriver and
inserts
T30
Hexagon screwdriver
and inserts
4, 5, 6, 7, 8 mm
Hexagon nut driver
and inserts
7, 10, 14 mm
Combination wrench
and inserts 7, 10, 12,
15, 19, 24, 27 mm
12-point socket
wrench
12 mm
Spark plug wrench
Wrench size 16 mm
[5/8“]
Diameter: maximum
22 mm [0.87 in]