Textron MPE 850 OFF-ROAD - Removing Rocker Arms and Engine Mount

22 TD410023-B RLF
1
2
4
2
3
4
1
3
ENGINE DISASSEMBLY
REMOVING ROCKER ARMS
Start with the cylinder where the rocker arms
1
have a certain amount of play.
1. Remove the rocker axle
2
using a universal
pliers.
2. Remove the rocker arm
3
.
3. Remove two valve adjustment shims
4
using
a bar magnet.
4. Repeat the procedure with the other rocker
arm.
5. Turn the crankshaft in the rotation direction
until the rocker arms on the other cylinder have
a certain amount of play.
6. Remove two rocker arms on the other cylinder.
1. Mount the engine on the drive side on the
engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
Support:
– Minimum one mounting point M6
3
or
4
.
MOUNT THE ENGINE ON THE DRIVE SIDE
A