Textron MPE 850 OFF-ROAD - Removing Crankshaft Sensor and Generator;Stub Shaft

25TD410023-B RLF
1
2
1
3
1
2
2
4
ENGINE DISASSEMBLY
1. Mount the engine across from the drive side on
the engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
MOUNT THE ENGINE ACROSS FROM THE DRIVE SIDE
REMOVING GENERATOR AND STUB SHAFT
1. 7 mm: Remove six bolts
1
.
2.
8 mm: Remove the crankshaft locking
tool
2
.
3. Remove the rotor
3
.
4. Remove the stub shaft
4
.
1.
4 mm: Remove the bolt
1
.
2. Remove the sensor
2
.
REMOVING CRANKSHAFT SENSOR
A