32 TD410023-B RLF
1
1
2
2
1
2
ENGINE DISASSEMBLY
Only remove the thermostat housing if the
thermostat housing or the crankcase must be
replaced.
1.
5 mm: Remove ten bolts
2
.
The thermostat housing is sealed with a silicone
liquid seal.
2. Remove the thermostat housing
1
.
Observe in section C Additional working
instructions the chapters Thermostat housing
disassembly and Thermostat housing
reassembly.
REMOVING THERMOSTAT HOUSING
1. 5 mm: Remove two bolts
1
.
2. Remove the chain guide
2
.
REMOVING CHAIN GUIDE
1. T30: Remove the bolt
1
.
2. Remove the chain rail
2
.
REMOVING CHAIN RAIL
To Next Page
Loading...
