Textron MPE 850 OFF-ROAD - Engine Mounting and Oil Filter Replacement; Installing Chain Rail and Guide

38 TD410023-B RLF
1
2
3
4
1
2
1
ENGINE REASSEMBLY
MOUNT THE ENGINE ON THE DRIVE SIDE
1. Mount the engine on the drive side on the
engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
Support:
– Minimum one mounting point M6
3
or
4
.
1. Insert the chain rail
2
.
2.
T30: Install the bolt
1
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
INSTALLING CHAIN RAIL
REPLACING OIL FILTER
1. Replace the oil filter
1
.
2. Install the oil filter according to the specification
Oil filter. (See section D Tightening torques
und assembly instructions.)
3. When replacing the threaded sleeve, install
the new threaded sleeve according to the
specification Threaded sleeve for oil filter.
(See section D Tightening torques und
assembly instructions.)
B