Textron MPE 850 OFF-ROAD - Page 43

43TD410023-B RLF
20
16
15
18
17
19
ENGINE REASSEMBLY
26. Place the lower case
20
onto the upper case.
22. Turn the crankshaft
16
180°.
21. Observe the markings
15
.
Both markings ends flush with the crankcase.
23. Check if the centering pins
17
and
18
are
installed.
24. Apply the silicone liquid seal according to
the specification Liquid sealing contour
crankcase. (See section D Liquid sealing
contours.)
25. Check the markings
19
.
Both markings appear as shown.
B