Textron MPE 850 OFF-ROAD - Installing Crankshaft Oil Seal

48 TD410023-B RLF
B
A
B
B B B
B
A
A
AA
B
A
A
2
1
2
1
3
ENGINE REASSEMBLY
1. Mount the engine across from the drive side on
the engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
MOUNT THE ENGINE ACROSS FROM THE DRIVE SIDE
INSTALLING CRANKSHAFT OIL SEAL
1. Replace the oil seal
1
.
2. Coat the inside of the oil seal
3
lightly with
petroleum jelly.
3. Slide the oil seal onto guiding sleeve
2
.
4.
5 mm: Install seven bolts M6x30
A
and
seven bolts M6x20
B
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
5. Turn the engine 180°.
B