54 TD410023-B RLF
7
8
10
9
11
13
12
ENGINE REASSEMBLY
Do not install the guide completely. A gap must
remain between the guide and the water pump
axle.
7.
7 mm: Install the guide
7
.
8. Replace the slide ring seal
8
.
NOTICE! Leaks can be caused by defective slide
ring seal. Do not slide the slide ring seal by hand
onto water pump axle.
9. Slide the slide ring seal onto guide.
10. Slide the sliding sleeve
9
onto guide.
11.
15 mm: Install the nut
10
.
12.
15 mm: Screw in the nut
11
until the slide
ring seal is inserted completely.
Tightening torque:
10 Nm +1 Nm [7.4 lbf ft +0.7 lbf ft]
13. 15 mm: Remove the nut
13
.
14. Remove the sliding sleeve
12
.
To Next Page
Loading...
