Textron MPE 850 OFF-ROAD - Installing Oil Cooler; Mount the Engine Across from the Drive Side

56 TD410023-B RLF
1
2
2
3
B
B
B
B
A
B
B
B
B
B
B
B
1
3
ENGINE REASSEMBLY
4. Position the oil cooler bracket
3
to the
crankcase.
5.
5 mm: Install the bolt M6x30
A
and twelve
bolts M6x20
B
according to the specification
Other bolts M6 Standard. (See section D
Tightening torques und assembly instructions.)
1. Replace four gaskets
2
.
2. Insert four gaskets into the grooves and lightly
coat with petroleum jelly.
3. Hold the oil cooler
3
in position.
4.
T30: Install four bolts
1
according to the
specification Other bolts M6 Standard. (See
section D Tightening torques und assembly
instructions.)
INSTALLING OIL COOLER
1. Mount the engine across from the drive side on
the engine stand.
Suitable mounting points M10:
– Screw-in depth
1
and
2
30 mm
MOUNT THE ENGINE ACROSS FROM THE DRIVE SIDE
B