Textron MPE 850 OFF-ROAD - Installing Spark Plugs and Ignition Coils

58 TD410023-B RLF
1
2
1
4
3
3
4
ENGINE REASSEMBLY
INSTALLING SPARK PLUGS
1. Check two spark plugs according to the
specification Spark plug gap. (See section D
Test procedures and adjustments.)
2.
16 mm: Install two spark plugs
1
using a
spark plug wrench according to the
specification Spark plugs. (See section D
Tightening torques und assembly instructions.)
1. Insert two ignition coils
3
.
2. Replace the serrated lock washers
1
and
4
.
Observe the arrangement of the serrated lock
washers and washers.
3.
5 mm: Install four bolts
2
according to the
specification Other bolts M6 Anti-Seize
assembly paste. (See section D Tightening
torques und assembly instructions.)
INSTALLING IGNITION COILS
5. Apply the valve cover
4
.
6.
5 mm: Install eight bolts
3
according to
the specification Valve cover bolts. (See
section D Tightening torques und assembly
instructions.)
B