Textron MPE 850 OFF-ROAD - Removing Camshaft; Removing Valves

70 TD410023-B RLF
9
8
1
2
3
4
1
2
ADDITIONAL WORKING INSTRUCTIONS
8. 5 mm: Remove two bolts
9
.
9. Remove the bracket
8
.
REMOVING CAMSHAFT
Only remove the camshaft if the camshaft or
the cylinder head must be replaced.
1.
5 mm: Remove four bolts
1
.
2. Remove two bearing caps
3
using a bearing
cap remover
2
.
3. Remove the camshaft
4
.
REMOVING VALVES
1. Install the valve spring compressor according
to the manufacturer's instructions.
2. Press the valve spring
2
together using the
valve spring compressor according to the
manufacturer's instructions.
3. Remove two collet valves
1
using a bar
magnet.
4. Remove the valve spring compressor.
C