Textron MPE 850 OFF-ROAD - Removing Coolant Sensor; Thermostat Housing Reassembly; Installing Coolant Sensor; Installing Thermostat

77TD410023-B RLF
1
1
1
2
ADDITIONAL WORKING INSTRUCTIONS
REMOVING COOLANT SENSOR
1. 19 mm: Remove the sensor
1
.
THERMOSTAT HOUSING REASSEMBLY
1. 19 mm: Install the sensor
1
according to
the specification Coolant sensor. (See
section D Tightening torques und assembly
instructions.)
INSTALLING COOLANT SENSOR
1. Coat the contact area of the thermostat
1
lightly with petroleum jelly.
2. Replace the distance washer
2
.
3. Apply the distance washer on the thermostat.
INSTALLING THERMOSTAT
C