87TD410023-B RLF
2
1
SPECIFICATIONS
LIQUID SEALING CONTOUR THERMOSTAT HOUSING
1. Clean the sealing surfaces on the crankcase
and thermostat housing.
2. When the thermostat housing has a sealing
groove
1
apply the silicone liquid seal into
the sealing groove on the thermostat housing
including an overhang of 1 mm without gaps.
or
3. When the thermostat housing has no sealing
groove apply the silicone liquid seal
2
on the
thermostat housing without gaps as illustrated.
To Next Page
Loading...
