25DHB MPE850 UTV Rev A | 409135 |
5 Troubleshooting with trouble codes
5.2 Description of trouble codes
Trouble code
Displayed fault
Trouble code description
Possible consequences
Affected part/system
► Possible consequences/remedy
P061A Internal Monitoring of Torque Error –
► Contact the vehicle manufacturer or
Textron Motors directly.
P061B Internal Monitoring - Torque Intervention
Excessive
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P061C Internal Engine Speed Monitoring Error –
► Contact the vehicle manufacturer or
Textron Motors directly.
P0626 Alternator Voltage Too High
Charging voltage too high.
Voltage regulator/Generator
► Check the voltage regulator. (See chapter 6
Test procedures at engine.)
► Check the generator. (See chapter 6 Test
procedures at engine.)
P0638 Auto Configuration Throttle Input - Error upper
return spring check
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P063A Auto Configuration Throttle Input - Adaptation
condition exceeded
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
To Next Page
Loading...
