26 DHB MPE850 UTV Rev A | 409135 |
5 Troubleshooting with trouble codes
5.2 Description of trouble codes
Trouble code
Displayed fault
Trouble code description
Possible consequences
Affected part/system
► Possible consequences/remedy
P063B Auto Configuration Throttle Input - Limp home
adaptation is out of range
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P063C Auto Configuration Throttle Input - Lower
mechanical stop adaptation is out of range
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P063D Auto Configuration Throttle Input - Lower
position is not reached
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P063E Auto Configuration Throttle Input - Error lower
return spring check
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
P063F Auto Configuration Throttle Input - Upper
position is not reached
Throttle body
► Check wiring in the wire harness to
the affected part. (See the vehicle
manufacturer‘s documentation.)
► Replace the affected part. (See the vehicle
manufacturer‘s documentation.)
To Next Page
Loading...
