B
TRUCK BED
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
47
Repair and Service Manual
668061
Decal Replacement
Tool List Qty.
Alcohol..................................................................... A/R
Clean Cloth.................................................................. 1
Squeegee.................................................................... 1
When replacing decals on the body panels:
1. Prepare the surface by cleaning with alcohol and a
clean cloth. Allow the surface to dry.
2. Peel away the decal backing and apply to the sur-
face.
3. Use a squeegee to smooth out the decal and remove
any air pockets trapped under the decal. A needle
can be used to puncture any remaining air pockets
that cannot be otherwise removed.
To Next Page
Loading...
