EasyManua.ls Logo

TFA 60.2543 - Page 14

TFA 60.2543
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2726
Design Radio-controlled alarm clock
Design Radio-controlled alarm clock
Confirm with the MODE button.
5 (default) or the last adjusted snooze interval appears on the display.
Press the UP or DOWN button to set the desired time duration (5 to 60 minutes).
Confirm with the MODE button.
To activate the alarm function slide the ALARM ON/OFF switch to ON.
The alarm symbol appears on the display.
When the adjusted alarm time is reached, the alarm rings.
Press any button (except SNOOZE/LIGHT) and the alarm will stop.
The alarm symbol remains on the display.
If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and it
will be reactivated at the same set time on the following day.
When the alarm rings, press the SNOOZE/LIGHT sensor button briefly and the snooze function is activated.
Once the snooze function is activated, the snooze symbol will be flashing on the display.
The alarm will be interrupted for the set time (5 minutes default).
To deactivate the alarm function slide the ALARM ON/OFF switch to OFF. The alarm symbol disappears.
8. Display light
Press the SNOOZE/LIGHT sensor button to adjust the brightness in 2 levels or to switch it off (LOW – HIGH –
OFF). The default setting is LOW.
Confirm with the MODE button.
The hour digits flash.
Press the UP or DOWN button to adjust the hours.
Confirm with the MODE button.
Set the minutes in the same way.
Confirm with the MODE button.
The manually set time is overwritten once the DCF time signal is successfully received.
7.2.1 24- or 12-hour system setting
Press the DOWN button in normal mode to choose between the 12 - or 24-hour system.
In 12 HR system PM appears after 12 h on the display.
7.3 Alarm time setting
Press the MODE button in normal mode to enter the alarm mode.
A1 and 6:00 (default) or the last adjusted alarm time appear on the display.
Press and hold the MODE button for 2 seconds.
The hour digits flash.
Press the UP or DOWN button to adjust the hours.
Confirm with the MODE button.
Set the minutes in the same way.
TFA_No. 60.2543_Anleit_05_23 27.05.2023 15:16 Uhr Seite 14

Related product manuals