To Next PageTo Next Page
Need help?Do you have a question about the The Armstrong Monitoring Corporation AMC-400 Series and is the answer not in the manual?
General| Output Signal | 4-20 mA, RS-485 Modbus |
|---|---|
| Technology | Electrochemical, Catalytic, Infrared |
| Operating Temperature | -40°C to +70°C |
| Certifications | ATEX, IECEx, UL, CSA |
| Measurement Range | Varies by gas and sensor type |
| Enclosure Rating | IP66 |
| Response Time | Varies by gas and sensor type |
Lists order numbers, power supply, warranty, operating conditions, and signaling for the transmitter.
Provides specifications for various Smart Sensor 2 modules (CO, NO2, CH4, C3H8, H2).
Guidelines for choosing a mounting location and attaching the transmitter securely.
Explains the four-wire system, cable types, and routing for signal and power transmission.
Explains MODBUS terminations and shield connections to the AMC-1DBx Digital Monitor.
Describes 24VDC powering options from monitors or external supplies, including limitations.
Explains MODBUS communication over RS-485, bus length, termination, and unit loads.
General overview of transmitter operation, startup sequence, and display indications.
Provides guidelines for diagnosing MODBUS faults based on transmitter LED patterns.
Explains the need for unique MODBUS addresses and the configuration menu areas.
General information on calibration procedures, indicators, and maintenance requirements.
