The Container Store Elfa - Solid Shelving; Install Connected Shelves

TIP
Solid Shelving
• There are pre-drilled holes on the bottom of the Shelf for ease
of installation.
• The row of Shelving closest to the middle should be installed first.
(Figure A)
• Group Shelves by color: 30" Shelves have a blue sticker; 25" End
Shelves have a green sticker; 24" Center Shelves have a red sticker.
The sticker also indicates the front of the Shelf.
Install Connected Shelves
(Figure A)
– Flip the Shelf upside down to expose the holes with the back of the
Shelf toward you.
– Insert the Shelf Connectors as shown. (Figure B)
– Flip the Shelf right side up and place the Shelf Connectors into the
Bracket notches. Connected Shelves share a Bracket. (Figure C)
– After installing the middle row of shelving, repeat for each row
of Shelves.
STEP 1
STEP 2
Shelf
Connector
away
from edge
Shelf
Connector
toward
edge
Shelf
Connector
toward
edge
Shelf
Connector
away
from edge
Middle
Row
Front Edge
A
B
C
Installation Service
12
Visit containerstore.com/installation to view video instructions.