18
Inkludierte Beispieldateien • Included sample les
1) Drucker Ersatzteile • Printer spare parts
a) Material PLA ø1,75 mm • Material PLA ø1.75 mm
Druckparameter unter „Settings“ Printing parameters under „Settings“
1,750 mm
25,0 mm/s
0,60 mm
1,00
0,050
Druckgeschwindigkeit: 50 - 200% Printing speed: 50 - 200%
•) Klemme_UniPrint3D_03-2016
Klemme_UniPrint3D_03-2016.ngc
Klemme_UniPrint3D_03-2016.stl
•) mechanical-endstop-housing_X-new
mechanical-endstop-housing_X-new.ngc
mechanical-endstop-housing_X-new.stl
•) mechanical-endstop-housing_Y
mechanical-endstop-housing_Y.ngc
mechanical-endstop-housing_Y.stl
•) clamp_extruder_harness
clamp_extruder_harness.ngc
clamp_extruder_harness.stl
To Next Page
Loading...
Need help?
General