EasyManua.ls Logo

The First Years My Expression - TO DISASSEMBLE AND CLEAN; Cleaning the Pump Handle

The First Years My Expression
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TO DISASSEMBLE AND CLEAN
DO NOT BOIL PUMP HANDLE as it may cause damage to the pump unit. As needed,
wipe pump handle surface with a damp cloth or sponge using mild liquid soap.
Wipe with clear water. Do not immerse in water or place in dishwasher.
Cleaning Pump Body Valve Handle
Guide and Shield
Surface
Wipe Only
Warm Water/
mild liquid soap
Top Rack
Dishwasher-safe
(2-5 min)
**Boil-Safe
(use as instructed)
**Harmless color change possible. Allow all parts to cool before reassembling.
rim
When removing
valve, always handle
the valve by the tab
on the outer rim.
Avoid pulling or
pushing on middle
of valve.
1) Press and hold square on pump cap turning
until the cap arrow aligns with the arrow on the
pump rim. Pull up to release pump cap.
3) Unscrew bottle from pump body.
2) Lift up on edge of silicone cup inside pump
body to release the entire cap and pump
handle assembly.
4) Flip pump over. Using tab on outer rim of
valve, pull down to release.
5) Clean all components before initial use.

Related product manuals