The Garage Door Guru GD-RFO12 User Manual

WARNING
This unit is supplied for low voltage switching. It
should not be used to switch 240v unless it is mount-
ed in an earthed enclosure.
This enclosure is not rated for external use and
should be used indoors only.
If the unit is connected to any machinery, that
machinery will operate during the coding se-
quence, therefore keep the operating area clear
during coding.
Keep the handsets out of reach of children and
keep it in such a way that the buttons can not be
pressed unintentionally.
Only operate the door when it is within view and
you are able to see that it is not obstructed.
We recommend this unit is fitted by a qualified Door
Systems Engineer.
Fenland Garage Doors Ltd.
GD-RFO12
WARRANTY
This unit is guaranteed for 2 years against any defects.
Full conditions are available on request
Voltage : DC24V-48V
Current : 33.5mA
Fenland Garage Doors Ltd.
GD-RFO12
Voltage : DC24V-48V
Current : 33.5mA
Bexwell Business Estate
Downham Market
PE38 9LT
01366 382815
help@thegaragedoorguru.com
www.thegaragdoorguru.co.uk
Instructions for GD Receiver Kit

The Garage Door Guru GD-RFO12 Specifications

General

Brand	The Garage Door Guru
Model	GD-RFO12
Category	Receiver
Language	English

Summary

Powering the GD Receiver Kit

Pairing Garage Door Remotes

Connecting the GD Receiver Kit

Momentary Contact Connection

Connects for impulse open/close operation on most garage doors.

Roller Shutter Connection

Connects for separate up and down buttons on roller shutters.