The Learning Journey Techno Gears Marble Mania Twin Twister User Manual

Attaching four support structures (36) to the base grid for initial setup.

Installing the motor unit (123) onto the base structure.

Attaching additional support pieces (12) and (14) to the assembly.

Connecting the primary gears (3) and spacer (79) to the mechanism.

Attaching additional drive gears (38) and (8) to the gear train.

Assembling the yellow lift component (33) with connectors (9, 122).

Attaching blue tube connector (28) and clear supports (11, 122).

Attaching the green vertical track (18) and securing clips (16).

Attaching the drive gear (4) and spacer (79) to the mechanism.

Attaching the large blue funnel (7) to the top of the structure.

Assembling the purple track (21) with clips (16, 73) and end (71).

Assembling the cyan twisted track (42) with clips (16, 73) and end (71).

Assembling the spiral lift mechanism (30) with base (25) and tip (31).

Assembling support structures (10, 11) for the yellow lift part (34).

Attaching the final top cap (32) to the lift mechanism.

Attaching the orange horizontal track (58) using clips (16).

Connecting the final drive gear (4) using parts (14, 79).