EasyManua.ls Logo

The Pool Factory Saltwater Aurora User Manual

Default Icon
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION MANUAL
OVAL POOL
SALTWATER AURORA
12.19
V35079-AUR
Question and Answer IconNeed help?

Do you have a question about the The Pool Factory Saltwater Aurora and is the answer not in the manual?

The Pool Factory Saltwater Aurora Specifications

General IconGeneral
BrandThe Pool Factory
ModelSaltwater Aurora
CategorySwimming Pool
LanguageEnglish

Summary

Pool Safety and Installation Essentials

General Pool Safety Guidelines

Covers crucial safety rules for pool use, including supervision, electrical, chemical, and general precautions.

Liner and Base Installation Importance

Critical information on base preparation for liner support and following manufacturer instructions for installation.

Section 1: Ground Preparation

Parts Listing and Footprint Diagrams

Overview of parts required and detailed footprint diagrams for different pool sizes.

Site Selection and Terrain Requirements

Guidelines for choosing a suitable pool location, avoiding hazards, and planning the site.

Foundation Preparation: Marking and Leveling

Detailed steps for marking, preparing, and leveling the ground for pool installation.

Straight Section Pre-Assembly

Steps for pre-assembling the straight sections, including channels, plates, and uprights.

Buttress Ground Preparation

Procedures for measuring, digging, and preparing trenches for the pool buttresses.

Buttress Straps and Plates Assembly

Steps for assembling buttress straps and pressure plates, securing them to the structure.

Section 2: Assembling the Pool Base

Bottom Rails, Plates, and Patio Stones

Installation of bottom rails, plates, and recommended patio stones for the pool base.

Upright Installation for Straight Sections

Procedure for installing upright covers and attaching them to the buttress for straight sections.

Section 3: Assembling the Pool Wall

Pool Wall Installation and Cove Assembly

Steps for preparing, setting, joining, and covering the pool wall, including cove creation.

Section 4: Assembling the Pool Frame

Uprights, Top Ledges, and Ledge Covers

Installation of uprights, stabilizers, top plates, ledges, and decorative covers for the pool frame.

Final Filling and System Flow

Procedures for filling the pool with water and understanding the basic system flow.

Section 5: Pool Maintenance

Routine Maintenance and Cleaning

Guidelines for regular cleaning, inspection, and immediate corrective action for pool components.

Winterizing and Spring Preparation

Procedures for closing the pool for winter and preparing it for the spring season.

Related product manuals