— E20 —
Operation
Using the AUX IN Jack
1
Connect the unit as described
previously. Press the
button to turn
the unit on.
2
Connect the external unit to the
AUX IN Jack on the rear of this unit.
Connecting an external unit will allow
the audio to be played through your
Singing Machine.
NOTES:
• It is highly recommended to set the volume
on the external unit to 1/3 or lower to avoid
distortion.
• Skipping files/tracks is not possible to
perform on this unit when using an external
device.
3
Repeatedly press the LIGHTS/
FUNCTION button to select the AUX
IN mode; “AU” will appear in the display.
4
Adjust the volume using the MASTER
VOLUME control on this unit or your
external device’s volume control.
5
Connect microphone(s) and slide the
ON/OFF switch on the microphone to
the ON position.
u
x
v
y
w
To Next Page