— 14 —
Operation
Playing Songs from the USB (Continued)
12
PROGRAM: You can program
up to 20 tracks for playback in
any desired order. While in the
Stop mode, press the REPEAT/
PROGRAM button; the Program
indicator will blink and ”01” will
appear on the display indicating the
first program is ready to program.
Select the first track using the
Skip
–/Navigation and Skip +/
Navigation
buttons. Press the
REPEAT/PROGRAM button again
to confirm the entry. Repeat to
set up to 20 tracks into memory.
When done, press the ENTER/
Play/Pause button
to start
playback.
Notes:
• Press the STOP/PAIR button TWICE to
stop and clear the program.
• If more than 20 tracks are attempted
to be programmed, “FUL” will appear in
the display.
13
PAUSE: During playback, if
you wish to pause the music
momentarily, press the ENTER/
Play/Pause
button; the Play/
Pause indicator will blink. Press
again to resume normal playback.
14
Press the STOP/PAIR button to
stop playback.
15
Press the POWER ON/OFF button
to turn the unit off.
1212
12
12
13
14
15
To Next Page
Loading...
