It is important to know that montages, where the electrodes are placed, are the basis for the specific benefit claims
of tDCS.
As new tDCS applications are actively studied in the academic and scientific circles, additional montages are
posted with their respective results. For more information on montages, electrode positioning, studies & uses,
please refer to TheBrainDriver.com (https://thebraindriver.com/). We actively update the site with links to the
latest research data.
How to OperateTheBrainDriver™
Basic Operation
Power On The Device Press the ON/OFF button and hold for approximately 3 seconds until screen turns on.
Select Session Time: Press “T” to toggle the session timer between 20 or 30 minutes.
Select Output Level Press “U” to increase output from 0.5mA up to 2.0mA. The default output is set to the lowest
setting, 0.5mA. This is where we recommend beginning each session.D= Adjust the power down. *Tip: You can also
continue pressing the “U” or “D” button to scroll through all the outputs; 0.5mA, 1.0mA, 1.5mA, 2.0mA.
(/)
To Next Page
Loading...