Need help?Do you have a question about the Thecus N8900PRO and is the answer not in the manual?
Connect the Ethernet cable to the WAN port on the N8900/N8900PRO and to your network.
Connect the power cord to the device and turn it on.
Access the interface using the default IP 192.168.1.100 and admin/admin login.
Insert the CD and launch setup.exe or .dmg if it does not auto-start.
The wizard automatically detects all Thecus NAS devices on the network.
Log in to the device using the administrator account and password.
Assign a system name and configure network settings (Fixed IP or DHCP).
Secure the device by changing the default administrator password.
Launch the administrator web interface via the "Start Browser" button.
Connect the Ethernet cable to the WAN port on the N8900/N8900PRO and to your network.
Connect the power cord to the device and turn it on.
Access the interface using the default IP 192.168.1.100 and admin/admin login.
Insert the CD and launch setup.exe or .dmg if it does not auto-start.
The wizard automatically detects all Thecus NAS devices on the network.
Log in to the device using the administrator account and password.
Assign a system name and configure network settings (Fixed IP or DHCP).
Secure the device by changing the default administrator password.
Launch the administrator web interface via the "Start Browser" button.
General| Model | N8900PRO |
|---|---|
| Category | Storage |
| Form Factor | Tower |
| Drive Bays | 8 |
| RAID Levels | 0, 1, 5, 6, 10, JBOD |
| RAM | 2GB |
| Network Interface | 2 x Gigabit Ethernet |
| USB Ports | 3 |
| Operating System | Thecus OS |
| Weight | 8.5 kg |
| Memory | 2GB |
| eSATA Ports | 2 (rear) |
| Power Supply | 300W Redundant Power Supply |
To Next Page
