Need help?Do you have a question about the TheLoudest.com Competition Pro TL-1092 and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Subsonic Filter | 10Hz - 50Hz |
| RMS Power at 4 Ohms | 1000W |
| Input Sensitivity | 0.2V - 6V |
| Bass Boost | 0 - 18dB |
Covers Audio Input, Gain, Bass, Treble controls, and Normal/Subwoofer switch for audio adjustment.
Explains the function of the Power and Protection LEDs for system status and fault indication.
Details the Speaker and Power connection terminals for wiring the amplifier correctly.
Describes the role of the ATC fuse in protecting the amplifier from overdrive and potential damage.
Guides on connecting the vehicle's battery power and chassis ground to the amplifier.
Details connecting the audio source signal (RCA) and remote turn-on wire to the amplifier.
Covers connecting speakers and the crucial process of calibrating amplifier gain to the source unit.
Advises on the risks of hearing loss and other side effects from high-volume listening.
Covers safe listening levels, cleaning, and installation environment to prevent hazards.
Diagnoses and resolves problems related to power, output, or protection indicator lights.
Addresses distorted audio, weak bass, or other sound quality issues.
Provides solutions for persistent blowing of the amplifier's fuses.
Details maximum output power, frequency response, input sensitivity, and signal-to-noise ratio.
Lists speaker impedance, and ranges for treble and bass controls.
Specifies the required power supply voltage and the physical dimensions of the amplifier.
Highlights include 2-channel input/output, stereo/bridged modes, gold-plated terminals, and protection circuits.
To Next Page
