Themis TS-500 Quick Guide

Note: 1. More details refer to User Manual. 2. For better readability, please print this document with laser printer. 3. Version: TS-500_QG_EN_V1.3.
TS-500 Presentation Imager Quick Guide
Note
Parts of the imager
Installing the cable
1. Switch off the host;
2. Refer to the below pictures, connect the host with the imager based on different cables;
3. Ensure that all connections are secure.
4. Switch on the host system. If the installation is successful, the beeper will beep and LED
will light.
RS232 cable USB cable
Return default parameters and version information
Default value initialization Firmware version list
Note: If the host cannot receive data normally because the input speed of the imager is too
fast, please scan the barcode below:
Programming instruction and example
Two programming modes have been provided as bellows:
Ø Single-scan setting
Scan the appropriate
Single-scan setting
Example: to set Flow control to be XON/XOFF.
Ø Multiple-scan setting
Example: to set Flow control to be XON/XOFF.
F
A standard packing includes a
n
imager
, a USB cable and a CD (or a user manual).
F
Accessories
include a RS232 cable, a 5V adaptor.
F
Use
a piece of
dry and soft cloth
when
clean
ing
the
imager
is in need
.
Scan window
Beeper
Trigger
All manuals and user guides at all-guidesbox.com
all-guidesbox.com

Themis TS-500 Specifications

General

Brand	Themis
Model	TS-500
Category	Laboratory Equipment
Language	English