Unpack the unit; place it on a flat,
secure surface.
Pour up to 9 bags of refill paraffin
wax in to the tank.
Place the plastic grille on top of the
unmelted paraffin.
Rest the lid on top of the grille.
(the paraffin will compact as it melts)
Attach plug; plug in the unit.
(the paraffin will fully melt in 6 - 8 hours)
During proper operation, the light turns
on and off regularly (as the unit is
heating), and is mostly off. The light is
not an indication that the wax is melted.
5 EASY STEPS
to get you up and running with your THERABATH PARAFFIN BATH!
www.therabath.com
BEFORE YOU BEGIN, locate and record the Lot Number
found on the bottom of your unit (shown at right).
You will need this to register your warranty.
To Next Page
Need help?
General
