What to do if my Therabody RecoveryAir JetBoots Medical Equipment pump is not working?
If your Therabody Medical Equipment pump isn't working, first, check the electrical wall outlet. Next, ensure the DC power adapter cable is securely connected to both the DC adapter socket on the console and the 100-240 Volt wall outlet. Finally, examine the DC power adapter cable for any defects.
Why does my Therabody RecoveryAir JetBoots Medical Equipment pump stop and the Status Indicator turn yellow?
If your Therabody Medical Equipment pump stops and the Status Indicator turns yellow, it might be due to a hose not properly connected to the garment or pump, or the prong plug is not inserted into the unused air outlet. Check and fasten all air connections. When treating only one limb, always plug the unused air outlet with the prong plug provided with the pump. If the problem persists after checking the connections, contact Therabody.
What to do if my Therabody RecoveryAir JetBoots pump starts and stops immediately?
If your Therabody Medical Equipment pump starts and stops immediately, the air may not be moving through the garment hose. Examine the hoses for kinks, twists, and folds.
General| Category | Medical Equipment |
|---|---|
| Size | One Size Fits Most |
| Power Source | Rechargeable Battery |
| Wireless Operation | Yes |
| Customizable Programs | Yes |
| Compression Range | 20-100 mmHg |
| Product Type | Compression Therapy Device |
| Intended Use | Muscle recovery |
| Type | Pneumatic Compression Boots |
| Technology | Pneumatic Compression |
| App Connectivity | Yes |
| Material | Medical-grade fabric |
| Portability | Portable |
| Control Method | App |
| Compatibility | iOS and Android |
To Next Page
