THERAGUN TheraCup - Charging

EN
8
Charging
• TheraCup
TM
is USB-C enabled.
• TheraCup
TM
includes a USB-C to USB-A cable.
• You can plug the device into any standard USB adapter.
• The USB port is located opposite of the MasterSwitch.
• The battery level is indicated in the LED indicator of the battery:
• Orange: low charge, blue: mid charge, green: fully charged.
• When charging, the LED will flash to indicate it is properly connected and will turn solid green when
complete.
• You can always check the battery level by inserting the battery level by dragging the switch to the
right while the device is on. The battery LED switches o while the device is turned o.
Note: If using a charger from a third party, ensure that it is from a certied manufacturer and has not suered any structural damage.
Do not try to use the device while charging.
Getting to know your cupping device