6. Temperature Resolution: 0.1 °C/°F
7. Low battery indication
Buttons
CHANNEL/SYNC: Press once to display the temperature readings from up to 3 outdoor remote sensors;
Press and hold this button to enter the synchronization mode.
°F /°C /: Press to select the temperature display in ºC or ºF.
Outdoor Remote Sensor (Transmitter) Features
1、Battery Compartment: Holds 2 X AAA batteries to power the unit
2、 Rain-proof and wall-mounted design
4. Outdoor Temperature range: -58°F ~ 158°F (-50 °C ~ 70 °C)
Buttons
CHANNEL Selector (1,2,3): Slide to set Channel 1,2 or 3.
RESET: Press once to reset the remote sensor.
TX: Press to send temperature data to the receiver manually.
Battery Installation and Setup
1、Open the battery compartment of the remote sensor as below Figure;
To Next Page
Loading...