10
Menu Overview
The dishwasher has been preset with certain settings for
your convenience. You can change these factory
settings.
Change the setting as follows:
1.
Open the door.
2.
Press the ON/OFF button (.
3.
Press and hold the ‹button for 3 seconds until
•:‹... is shown on the display window H
4.
Press the ‹button to access the individual
settings.
5.
Adjust the setting using the + and - buttons. P.
6.
Press and hold the ‹button for 3 seconds.
The chosen setting has now been stored.
Note: If you want to change several settings, first make
all your changes one after the other. Then press the
‹button for 3 seconds. All the settings will then be
stored in the dishwasher.
--------
* optional feature which may or may not be included with
your dishwasher.
Setting Factory set-
ting
Description
• Water hardness
•:‹‹ - •:‹ˆ
•
:‹‹
Setting the water hardness. When using Multitabs, select the lowest setting.
§ Rinse aid
§:‹‹ - §:‹‡
§
:ܠ
Amount of rinse aid affects drying.
†“ Sensor setting
†“:‹‹ -†“:‹ƒ
†“
:‹‹
Adjustment of the soil detection for optimum cleaning.
š Intensive drying
š:‹‹ - š:‹‚
š
:‹‹ / Off
Improved drying for glasses and plasticware.
˜ Auto power off
˜:‹‹ - ˜:‹ƒ
˜
:‹‹
Dishwasher automatically switches off at the end of each cycle.
‚ Info light *
‚:‹‹ - ‚:‹‚
‚
:‹‚ / On
Light is projected to signal an active wash cycle.
à Time light *
à:‹‹ - à:‹‚
à
:‹‚
Time light is on.
à˜ Last program
used
à˜:‹‹ - à˜:‹‚
à˜
:‹‚
Defaults to last program used.
à– Signal volume
à–:‹‹ - à–:‹„
à–
:‹ƒ
Volume of the signal at the end of a program.
›– Button volume
›–:‹‹ - ›–:‹„
›–
:‹ƒ
Volume of the button sound.
’Ÿ Wifi off/on
’Ÿ:‹‹ - ’Ÿ:‹‚
’Ÿ
:‹‹
Wifi connection is off.
‘’ Auto Connect
WPS: Auto pairing.
à‘ Manual Connect
SAP: Manual connection.
‘˜:˜ App Pair
Pair appliance to app.
§“ Factory Reset
“Yes”
To Next Page
Loading...
Need help?
General
